2015 DR Power Equipment 16.50 ft-lb Pro-XL, Electric-Start

Easy Transport

• With built-in detachable tow bar, getting to any job site is a cinch. Attaches to any ATV, UTV, or tractor (with the included pin hitch or two-inch ball hitch), allowing you to effortlessly bring your DR Stump Grinder to any corner of your property. Remove the tow bar with a single pin when you are ready to start working.

Mining-Grade Teeth

• The cutter head features eight steel teeth that are tipped with mining-grade tungsten carbide, a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2,800 rpm, these teeth take a remarkable 360 "bites" per second!

Oversized Tires Roll Over Rough Terrain

• These lugged high-flotation tires make for easy transport and give the machine full support during operation. Large size (15 x 4.75 inches) helps to keep machine elevated over wood chips during operation.

Simple Hand Controls

• Control the wheel brakes and engine throttle right from the handle bars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.

Simple Operation

• Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.